Lifting tables for rising and lowering of the lay-ups

• If activate once per minute - with constantly working hydraulic drive
• If frequency of activation doesn’t exceed 1 activation per 5 minutes the electric motor of the drive is switched on upon a lifting command.

Lowering is made without activation of the electric motor.
One hydraulic drive can be used to operate 3 tables.

Characteristics of lifting tables

Description of parameters	Models of lifting tables
	LUR14-17 05.21.000	PSUR-10 02.001	NO			SPM-1	SP-3	LOF 09.00.000
Number of hydraulic cylinders	2	1	2	3	5	2	2	1
Hydraulic cylinders type	Telescoping	Plunger D=100	GTs04 100х50х400			GTs04 100х50х250	GTs04 100х50х500	Telescoping
Production	Pilot batch	Serial	Serial			Serial	Serial	Pilot batch
Table type	Floor	1600 mm embedded	Floor			Floor	Floor	Floor
Length, mm	2780	1820	2220			1950	1780	2536
Width, mm	1614	920	1200			900	875	1690
Height in a folded state, mm	470	330	400			400	320	550 without conveyor 610 with conveyer
Table stroke, mm	1900	1000	1200			900	1000…1100	1026
Lifting capacity	5000 at 100 kg/sm²	3000 at 40 kg/sm²	1200 at 60 kg/sm² 2000 at 100 kg/sm²	2000 at 60 kg/sm² 3300 at 100 kg/sm²	3300 at 60 kg/sm² 5500 at 100 kg/sm²	1500 at 60 kg/sm² 2500 at 100 kg/sm²	1800 at 70 kg/sm² 2600 at 100 kg/sm²	При 40 kg/sm² Plunger stoke 275 537 788 1026 L/C 4250 3460 2540 1760

Models of lifting tables