Wood-peeling machine LU 17-10 for veneer production
The JSC "Proletarskaya Svoboda" manufactures equipment for veneer peeling.
Wood-peeling machine LU 17-10 is intended for production of peeled veneer 1600 mm long and from 0,3 up to 4,0 mm thick from billets of deciduous types of wood in accordance with GOST 9462-71 and from 1,15 up to 4,0 mm thick from billets of coniferous types of wood in accordance with GOST 9463-72.
Characteristics of a wood peeling machine LU 17-10
Length of the knife, mm
1700+60
Work billet length, mm
1550 … 1650
Diameter of the work billet, mm
160 … 700
The smallest diameter of the work billet (pencil), mm
70
Thickness of the veneer sheet, mm
0,3 … 4,0
Overall dimensions, mm (LõWõH)
6445õ2400õ2230
Weight of the machine, kg
10590
Description of the power line current
Variable, three-phase
Current frequency, Hz
50
Voltage, V
380
Air consumption, m3/hour
0,5
Operating pressure of compressed air, MPa
0,4 … 0,6
Number of maintenance personnel
1
Total established capacity, kW
47,8
Output of veneer in m3per hour
5,5
Note: click the image to zoom in.
Contacts
Russia, 150002, Yaroslavl, B.Fedorovskaja, 103 Phone 7 (4852) 45-00-01 Fax 7 (4852) 45-00-02 Sales department 7 (4852) 48-63-48 To write a letter
Peeled veneer - veneer, produced from wood of birch, beech, oak, fur-trees, alder, aspen, pine as well as from other types of wood.
Peeled veneer it is used:
For manufacture of plywood, plywood panels, laminated-wood plastics and other kinds laminated glued wood;
For veneering of parts and units in woodwork products;
